# 3x3x4 Rubik’s Cube

The Cube4You 3x3x4 is a fully functional 4 layered Rubik’s Cube. The pieces have the same size like a 3x3x3 but there’s an extra layer.

The C4Y puzzle is available in black and white body colors and comes in a DIY kit from the factory. You have to put it together and apply the vinyl stickers. It has the classic 3x3x3 core mechanism in the inside.

It has a very good quality, it moves excellent after lubrication and setting the tension. Letting the screws too loose you might have the feeling that the puzzle is going to fell apart, but making it too hard can make the turns harder. Try to find the balance according to your taste. Overall the puzzle can be used for speedsolving, it cuts corners and doesn’t pop the pieces.

## The solution

The solution of the 4x3x3 cube is absolutely not like the solution of the 3x3x3 or the 4x4x4 because the 3×4 layers can’t turn 90o, they make half turns, just like the Domino Cube and any other 3x3x(2n) puzzles.

You can solve the puzzle layer by layer following the steps below with the help of the picture on the right. R, L, F, B means 180o and U, D means 90o turns of two (!!!) layers, and after step 5 it means only one face turn.

#### 1. Upper-middle layer edges

Solve the first three edges intuitively and use the algorithm to do the last one. To move the front-right-bottom edge piece to the front-right-top do:

F D F D’ F

#### 2. Bottom-middle layer edges

Algorithm to switch the two edges in the bottom-middle layer in the back:

R F (D’ F D R) (D’ F D R D’)

#### 3. Middle pieces to their layer

If in one of the middle layers there are two center pieces with the same color then bring the center piece from the bottom left side to the upper right:

R (D2 F) (D2 F) (D2 F) R

#### 4. Solve the center pieces

If they’re next to each other switch the bottom-front center piece with the bottom-right:

(F U’) (F U2) R (F U2) F R U’ F

If they’re facing each other switch the bottom-front center piece with the bottom-back:

(R D2) (R D2) (R D2)

#### 5. Corner pieces to their layers

Do it intuitively, according to the color of the 3×3 center piece.

R U2 R

Until this point the U and D meant a two layer turns, from now on it is just one face turn!!!

#### 6. Solve the bottom corners

Algorithm to switch two corner pieces in the bottom-back:

R F (D’ F D R) (D’ F U F) U’

#### 7. Solve the top corners

Turn the cube upside down and use the previous algorithm.

#### 8. Upper and bottom edge pieces to their layer

Switch the upper-left edge with the bottom-left:

R (D2 F) (D2 F) (D2 F) R U2
R (D2 F) (D2 F) (D2 F) R

#### 9. Solve the upper and bottom edges

a) If they’re in opposite sides switch the one in the bottom-back with the bottom-front:

(R D2) (R D2) (R D2)

b) If they are next to each other switch the one in the bottom-right with the bottom-front:

(F U’) (F U2) R (F U2) F R U’ F

These algorithms also switch the center edge pieces in the front, marked with a star, so when you are doing these algorithms the second time move these pieces to the marked spots to set them right.

#### *. Parity

If the edges marked with the stars are switched:

(U2 R F) u2 (F R U2)

u – turn only the middle layer
U – turn both top layers